How to Pair Dewalt Bluetooth Headphones?

You are currently viewing How to Pair Dewalt Bluetooth Headphones?

When you buy new headphones, your headphones can make you hear your favorite music in a new way. But how to pair Dewalt Bluetooth Headphones? Most of the users have to face this issue and want to learn an easy and proper method. So, no need to worry, you can pair Dewalt Bluetooth Headphones after reading this article. Your Dewalt Bluetooth headphones need a few necessary settings to be paired.

Pairing the wired headphones is very easy as you have to need only to plug in your wired headphones and simply can start listening to your music. But if you have Dewalt Bluetooth headphones then they need a few settings. Keep reading on to know about, how to pair Dewalt Bluetooth Headphones. And more about Dewalt Bluetooth Headphones. So, let’s start!

How Can You Pair Your Dewalt Bluetooth Headphones?

  1. Make sure both the radio/charger as well as Bluetooth audio source should be placed rightly within 3.3′ (1 m) of each other.
  2. You have to press the power button so that you can turn on the radio/charger.
  3. To access the internet you can use the Bluetooth button.
  4. You can also pair another device by pressing the Bluetooth button.
  5. Make it conform that your device is properly paired with your computer.
  6. If the Bluetooth indicator is successful, then the pair can be paired perfectly.

How Can You Pair your Bluetooth Headphones?

  1. First of all, you have to open the settings.
  2. After that, you have to tap the Connections link next.
  3. Then you have to tap Bluetooth when you are ready.
  4. Now tap Scan you will find it at the top-right corner of your screen after you have opened the app on the screen.
  5. In the next step, you will press and hold the power button on your Bluetooth headphones.
  6. After pressing the power button you will tap your headphones once you have found them.

How Can You Reset Your Dewalt Bluetooth Headphones?

This might be necessary and important for you to do or apply a hard reset. You have to use a USB charger or port, then you have to connect your headphones to the device. While you see it is plugged in, you will hold the volume – and also the multifunction button (this is known as the power button) at the same time. This should reset your Dewalt Bluetooth headphones.

How Do You Find Your Bluetooth Headphones To Work Perfect Again?

  1. First of all, make sure you are using a reliable source to get information.
  2. After that, you have to check that your headphones are in a good and proper working position.
  3. You need to keep your headphones closer to your device than they are.
  4. Then make sure you have pair properly each of the buds.
  5. You should be disconnected from all the other devices.
  6. Now you have to need to update your firmware rightly.
  7. It’s very important to make sure there is no audio processing that is being performed.
  8. And be sure the audio codec of your Bluetooth is correct.

How do you get your DCR002 Bluetooth Adaptor to pair perfectly with your phone?

  1. First of all, you have to place both the Bluetooth® audio source and the receiver within at least one meter of each other.
  2. Now with the receiver off, you have to press and hold the control button just for 6-7 seconds until you will see the LED rapidly start flashing as red and blue. It puts the receiver properly in pairing mode enduring for 2 minutes.
  3. Now you have to activate the function of Bluetooth search on your audio device or your mobile phone. As the receiver is rightly found (just will appear as DEWALT Adaptor DCR002) need to confirm pairing on the device that is used. As the pairing is complete then the rapid red/blue LED flashing will cease and the indicator will also begin to flash as blue once every 5 seconds. Your device will show as connected if the pairing has been successful. 
  4. You can also consult the owner’s manual of your device for further details on the process of pairing and connecting properly.

How Do You Reset Your Dewalt Earbuds?

First of all, you have to turn on your earbuds by pressing the power button.

After that, you have to press the power button once again and then you have to hold this button for 5 seconds.

Here you will see turn on the alternating red and blue light. Your headphones have been reset and now you can be able to pair your earbuds with your device.

How Do You Connect Your Dewalt Bluetooth speaker properly?

The Bluetooth pairing is very easy and simple on DEWALT’s DCR010 speaker.

First of all, you have to turn on the power of the speaker press.

After that, you have to hold the Bluetooth button.

As you see the blue light begins blinking, it means you can be able to search for the DCR010 on the phone and have to select the pair option.

Conclusion

Wired headphones are easy and simple to pair and the other Bluetooth Headsets need settings to be paired. If you have Dewalt Bluetooth Headphones then don’t worry you just need to do the necessary setting as we mentioned above and you can be able to pair your Dewalt Bluetooth headphones. So, hopefully, you have learned about, how to pair Dewalt Bluetooth headphones. And some more about these headphones.

Leave a Reply