Is your laptop charger port loose? Now you want to know to fix a loose laptop charging port. So don’t worry, we have a solution for this issue. We are going to talk about how to fix a loose laptop charger port, issue. The easy method is mentioned in this helpful post that will make it easier to fix the laptop charging port.
Before that, you must have knowledge about the reason for the laptop charging port being loose. Why is your laptop charging port becomes so loose? If you replaced the AC power input jack from within the laptop to correct a loose charging port, it will be so helpful. But we must recommend that make sure the issue is with the charging port before taking any action or fixing it.
You must check out that the motherboard or the charging cable has a loose connection. After that, if you keep plugging the charger into the charging port, then it will fail. And this failure will destroy the charge port.
Check to see if the charging port is faulty
If it is faulty, contact the official after-sales service. This is a common thing, according to some notebooks. The looseness of charging plugs has a range but because the connection is connecting to the MB’s corner, this is caused by the motherboard flexing. It shouldn’t be an issue, but the MB can easily bend and sever the connection if you continue wriggling it.
This isn’t usually a defect; it mostly comes on low-end devices with poor internal Mobo support. Using the notebook, the charging port is not tight, you may see the setting failure or poor charging connection. The charging plug may swing in the charging port of your laptop. When the charging interface of your laptop becomes fails, then this situation occurs.
Why does my Charging port get loose?
There are a few basic reasons why your laptop charging port becomes loose. So these are mentioned below!
- The first and one of the most common reasons is to repeatedly remove and insert the charging plug of the charger of your laptop. When you plug in and out the charger repeatedly, then there is a chance of your charging plug becomes loose.
- Another reason is that you must see the small pins that are placed around the charging port of the laptop. When these small pins of the charging port are pressed down, then this charging port becomes loose. After that, you start having trouble charging the laptop due to this reason. And the laptop begins plugging in and out again and again. With the spending time, there is a chance of burning the component of the motherboard. And about, the laptop will not charge properly. And you become so upset with this issue.
- The long-term accumulation of dust and fluff may cause this.
How to fix a loose charging port?
The charging port of your laptop may lose But that’s not mean there is no solution to this loose charging port issue. So, we are going to tell you how to fix a loose laptop charger port. Much told are not required to fix loose laptop charging ports. Only one needle is enough to fix the laptop charging port. Let us take a look on step by step at how to fix it.
- First of all, take a needle to fix the loose port.
- Now you need to remove the laptop battery from its back carefully.
- Now you should lift the pin of the laptop charger port carefully with a needle.
- Next, you have to connect the charger to the laptop charging port slightly.
- Now, your issue will be solved 100%.
- But if you notice that your charging port is still loose, then you have to slightly lift the pin of that loose laptop charger port. Now the issue will be solved.
What to do if your charger port is broken?
If you notice that during the fixing process your charging port is broken, so what to do now? So you have to follow these steps carefully to fix this issue. But keep in mind that if you follow each step properly, you can fix the broken charging port of your laptop at home. Now you need a screwdriver to fix the laptop charging port by yourself at home. Let us see how to resolve the issue.
- First of all, remove the battery of your laptop.
- Now you have to unplug the screw on the top cover of the hard disk and remove the cover carefully.
- Next, you have to remove the screw on the hard disk and also remove it.
- Next, you have to remove the RAM chip from the hard disk.
- Now you have to unscrew all the remaining screws. Remember that, there should not be even a single screw attached to the board.
- Now you have to open the laptop.
- Now, remove the back cover very carefully.
- Finally, now you should remove the broken charging port and place a new charging port here.
Note: If you notice that the charging port is connected to the board then you may face problems in transferring it. If this charging port is of ribbon type then you can easily repair it. Otherwise, you can fix it by taking it to a repair center or getting the help of a professional.
Conclusion
First of all, check that if this problem really exists, it might be the damaged or faulty laptop charger. If you are sure the issue is with your charging port then you can fix it by the above-mentioned method. We have explained, to fix the loose laptop charging port. You just need to read this helpful article carefully. We hope so this, article will help you a lot!
