If you have purchased a Fulext headband or someone has gifted it to you, then you must not have much knowledge about it. If you are wondering how to connect a Fulext headband to a phone then don’t fret. Through this post, you will learn everything so clearly.
Well, Connecting the Fulext Headband to your phone is an effortless task that just takes only a few minutes. So we are going to mention a simple method to connect a flex headband to a phone. You just need to follow these steps carefully otherwise you could not connect this smart headband to your phone. So let’s get started for more detail!
What is a flex headband?
The Fulext is an innovative headband that lets the user attend calls, control music and volume and also help to take selfies while in motion. This smart headband gives the user more confidence while on the go. The Fulext Headband also offers unparalleled convenience and security to its users.
Well, the user just needs to connect The Fulext Headband to his smartphone via Bluetooth. In this way, all the user needs is a device with Bluetooth capability. After connecting the Fulext headband to the smartphone, anyone can make communication effortlessly.
How to connect the Fulext headband to the phone?
However, Connecting the Fulext Headband to your smartphone is straightforward but you need to pay full attention to this process. So here is a step-by-step guide:
Step 1: Use the Headband
- So, you have to unfasten the button on one end of your Headband first,
- Then you have to insert it into a USB port and connect it.
- Well, if you have no idea about how to identify the eight ports to correct for your device, then you simply consult its documentation and select the right one carefully.
- After connecting to the port, you have to pair the Headband with an existing Bluetooth device.
- Next, you need to pair mode by touching the ‘+’ indicator on your phone. You can do this by pressing the corresponding button in tandem from the on-screen menu.
Step 2: Attach the Connector
- Now, you have to Insert the connector into the right port on your phone, the right port is the standard micro USB which is used to connect the headband.
- Next, you have to Connect it up, and before plugging it in make sure that there are no errors in the setup.
Step 3: Find the Connection Point
- After the cable is inserted into the right port of the phone, inspect both ends of that cable before inserting it into the charging port on either side of it.
- Well, if you locate the connector, then you must have to remove the cap.
- You have to insert your finger to pry up on the sides with your device’s socket.
Step 4: Connect the Headband to Your Phone
- To create a strong bond between your smartphone and the Fulext Headband, you just have to simply plug the band into the port on your device.
- After that, you have to place it over your head to fully connect.
- Well, if everything is perfect now, you have to disconnect from the phone and head back to the port for a reliable connection.
Step 5: Press the Connect Button on Your Phone to Turn It On
Well, in order to commence the connection process, simply you have to press the small button located on the Fulext Headband. This button initiates a pair between your device and this headband.
Step 6: Adjust Your Fulext Headband
Finally, you have to adjust your Fulext headband. You have to fold it below the lobe. So then when you receive calls. Well, you have to find this position that is most suitable and lets you effortlessly answer phone calls without even looking towards the device.
Alternatively, you can also adopt this simple process to connect the Fulext headband to your phone via Bluetooth. Well, here is how to do this:
- Well, in order To put the Bluetooth module into pairing mode, you just have to press the middle button which is known as the power button for a few seconds. Keep in mind that if you press it for less time a slowly blinking red light can appear.
- Once it turns in pairing mode, then you show a rapidly blinking red light.
- Now you have to Select Bluetooth devices on the music player device that you need to pair the SleepPhones with.
- Here you have to select Acoustic Sheep from your device to pair it.
- Well done, you have done it perfectly.
Conclusion
If you want to connect the Fulext headband to a phone then you can follow the above-mentioned process. Well, in order To utilize the Fulext Headband for phone connectivity, you just simply connect the headbands to your mobile device. In order To disconnect, you just have to simply take off the loop and tuck it away. We have explained everything in detail. So that’s all you need to know about how to connect Fulext headband to phone. We hope this article will help you a lot!
