How To Connect Sesh Earbuds? Right Now

Do you want to Connect Sesh Earbuds? Skullcandy Sesh Evo earbuds are famous because they perfectly fit in the ears, and you can change sound modes without taking out your phone. While the earbuds were new, many problems were getting them in pairing mode and connecting them to your phone and laptop. Don’t fret about this. 

This article helps you connect Skullcandy Sesh Evo earbuds with their Bluetooth devices and learn how to get them into pairing mode. 

Get The Sesh Earbuds in Pairing Mode

1. Before pairing the earbuds to your device, ensure that the earbuds are fully charged.
2. Take the Earbuds out of the case they will power on automatically.
3. Again place the earbuds in the charging case and make sure their LEDs flash red. If the LEDs do not flash red, place the buds in the case and close the case, then open it, now the LEDs on both earbuds are lighted red.
4. Now, take both earbuds out of the charging case, and they will flash blue, showing they are syncing to each other.
5. If the left earbuds are flashing red and blue, they are in pairing mode and ready to connect with a Bluetooth device.

Connecting Process With Different Bluetooth Devices

Connect Sesh Earbuds With An Android Device

1. Open Settings and select Android Device.
2. Next, tap on the + Pair new device option, and turn on Bluetooth if it is off.
3. After that wait as the phone scans Bluetooth devices listed under Available devices.
4. From here select the Sesh Evo earbuds and accept pairing prompts that will come up on screen.
5. Then buds will audio prompt Connected once pairing is successful.
6. These steps will differ depending on the manufacturer of your Android device.

Connect Sesh Earbuds With a Window Device

1. Click on the taskbar and select Settings.
2. Now go to Bluetooth & devices and ensure Bluetooth is enabled.
3. Click on Add Device, then Bluetooth on the new window.
4. After waiting of few seconds earbuds appear among the available Bluetooth devices with the name Sesh Evo.
5. Then, select the earbuds and click on OK or pair. These steps are work for Windows 11.

Connect The Earbuds With MacBook

1. Click on the Apple menu go to System Settings and then Bluetooth.
2. Select the Sesh Evo earbuds on the list of available devices.
3. After these steps finally, select Connect, and now the pairing process is done, and your earbuds are paired to your device.

Connect Sesh Earbuds with an iPhone

1. Go to the settings on your iPhone and ensure that the Bluetooth is on, if it is not turn it on.
2. Now select the Sesh Earbuds From the list.
3. Click on them as they are ready to pair the device.

Use Earbuds in Solo Mode

What Is Solo Mode?

Use only one earbud while the other remains off. This is called Solo mode.

The Solo Mode feature allows users to be more aware of their surroundings or use one earbud while the other charges.

How to Reset The Sesh Earbuds?

1. If your earbuds are not functionally normal or you want to reset them to give a fresh start, follow the instructions given below this will help you a lot in this case.
2. First, forget the earbuds on your phone or from the source device through its Bluetooth settings.
3. Then remove the earbuds out of the case and manually turn them off by holding the touch area for four seconds.
4. Now, touch and hold the touch area for 10 seconds. After that in the result, the earbuds flashed blue, then red, and finally powered off.
5. Again place both buds in the charging case and ensure that the LEDs on the earbuds light show red when they are charging while in the case.
6. After that take out the earbuds from the charging case, and the LEDs on both earbuds will flash blue to show they are pairing with each other. 

FAQS to Connect Sesh Earbuds

1: How do I connect my Skullcandy Sesh Evo to my phone?

Put your earbuds in the pairing mode, and follow the steps below

iPhone:

Go to the iPhone Settings and then turn on Bluetooth after that select Sesh Evo from the list of ‘Other devices

Android: 

Open the Settings Connected devices select Pair new device and choose Sesh Evo from ‘Available device’s list and make a complete connection.

2: How do I put my Sesh Evo in pairing mode?

1. Place the earbuds in the charging case and make sure the LEDs on the earbuds glow red.
2. Now, take the earbuds out, and they will automatically power on, and in pairing mode when you see the left earbud’s LED flash red and blue alternately.
3. But if you want to connect to a different device, turn off its Bluetooth, and your Sesh Evo earbuds will go into pairing mode.
4. Alternatively, to put them in pairing mode hold the touch area on either earbud for 6 seconds.

3: How do I reset my Skullcandy wireless earbuds?

1. Take both earbuds out from the case and manually power them off by touching and holding the touch area on each earbud for 4 seconds.
2. Again, hold the touch area on both buds for 10 seconds, the earbuds will flash blue, then red, and power off.
3. Now, place them in the case and make sure the LEDs on both earbuds are flash red.
4. After that take the earbuds out and wait until the LED on the left earbud flashes red and blue. 

Conclusion

In conclusion, the Connect Sesh Earbuds offer a solid balance of affordability, convenience, and performance. With their sleek design, reliable Bluetooth connectivity, and decent sound quality, they cater to casual listeners and those seeking an easy-to-use wireless audio solution.

Their comfort, portability, and battery life make them a great choice for everyday use. If you’re looking for budget-friendly wireless earbuds that deliver a dependable listening experience, the Connect Sesh Earbuds are worth considering.