If you’re experiencing issues when your Finalmouse ceases to function when your computer goes to sleep You’re not the only one. Numerous gamers complain they experience Finalmouse stops working or goes non-responsive after the system comes back from hibernation or sleep mode. This issue is typically because of USB Power Management settings, firmware bugs or driver conflicts.
In this tutorial in this guide, we’ll discuss exactly how the Finalmouse ceases operating after the PC has gone to sleep as well as how you can solve it quickly — even if your computer isn’t tech-savvy.
What Happens When Your Finalmouse Stops Working After Sleep?
If your PC shuts down the system shuts down various hardware components in order to conserve power, including the USB port.
As as a result, devices such as the Finalmouse could lose connectivity.
In the wake of your computer it’s possible that the mouse might not be able to restart correctly. This can leave it in a state of limbo, not responding, or blinking in odd ways.
The most common symptoms are:
- Cursor isn’t moving following wake-up
- Final mouse is disconnected repeatedly
- Light indicator or RGB turning completely off
- Mouse works only after disconnecting the cable and replugging it
If you’re a victim of this If this sounds familiar, read on to learn how we can fix the issue step-by-step.
Why Finalmouse Stops Working After PC Sleep – Main Causes
Finding out the source of the problem can avoid the problem later on.
1. USB Power Saving Settings
Windows will automatically turn off USB ports in order to conserve power. After your computer is awake it, the port may not activate immediately, which leaves your Finalmouse inactive.
2. Outdated Mouse Drivers
The drivers that are outdated or not compatible with your system could fail to re-initiate following a the time of sleep. This happens if Windows Update hasn’t refreshed your USB or HID driver.
3. Firmware Bug in Finalmouse
Sometimes it happens that a software glitch may cause Finalmouse devices to fail to reconnect after the sleep mode.
4. USB Hub or Port Issue
If you’re making use of the USB hub or front-panel port the power distribution can be erratic. Ports on the back of motherboards are typically more stable.
5. Windows Fast Startup Conflicts
Fast Startup keeps hardware in a state of semi-sleep. Sometimes, this causes input devices such as the Finalmouse not to properly wake up.
Step-by-Step Fixes – Finalmouse Stops Working After PC Goes to Sleep
Use these steps in sequence. Each method addresses a particular reason for the issue.
Fix 1: Disable USB Selective Suspend Setting
- Open Control Panel – go to Power Options.
- Click Change your plan’s settings on the right side of your current plan.
- Pick Advanced power settings.
- Extend USB options Expand USB settings USB specific suspend option.
- Make sure both are on the Battery and Connected to disabled.
- Select Apply then click Click OK Then restart your computer.
This will ensure that Windows will not cut off the power supply to your Finalmouse when you’re in sleep.
Fix 2: Disable “Allow the computer to turn off this device”
- Press Windows + X, select Device Manager.
- Extend the Universal Serial Bus controllers.
- Right-clicking on every USB root hub and select properties.
- Visit The tab for Power Management tab.
- Check the box. allow the computer to shut off the device in order for power savings.
- Repeat this process for the other USB hubs.
This ensures your Finalmouse’s connection always on all the time, even while you sleep.
Fix 3: Update Finalmouse or HID Drivers
- In the Device Manager Expand Mice, as well as the other devices that point.
- Right-click your Finalmouse, select Update driver.
- Select the option to search automatically for drivers.
- Restart your PC after installation.
If you are using the Finalmouse Ultralight, Starlight and Centerpiece it is also possible to visit the official site for drivers tools and firmware patches.
Fix 4: Use a Rear USB Port
The ports in the front of the PC’s case typically have less reliable electricity.
Move your Finalmouse USB Receiver and cable to an back ports on the motherboard.
You’ll see better stability as well as more connections after a sleeping.
Fix 5: Disable Fast Startup (Windows 10/11)
- Start Control Panel, Power Options Make a selection of what the power buttons can do.
- Click to change settings that are not currently available.
- Do not uncheck the option to turn on speedy startup (recommended).
- Save the file and then restart.
This will ensure that Windows completely resets your USB devices after waking.
Fix 6: Reinstall USB Controllers
When none of the suggestions above does not work:
- Open Device Manager.
- The Expand universal Serial Bus controllers.
- Click on the right-hand side of each entry and select Remove your device.
- Reboot your PC.
Windows will automatically update the entire set of USB controllers, usually resolving sleep-related issues.
Fix 7: Check BIOS or UEFI Settings
A few BIOS options control USB behaviour during sleep.
Restart your PC and go to the BIOS (usually DEL or F2 key).
Find:
- ErP Mode / S4 – S5 State This can be disabled when it is it is active.
- USB Configuration Legacy USB Support – activate this.
- Wake up on USB Device – enable for your mouse to wake your PC.
Backup changes, then reboot.
Fix 8: Firmware Update (If Available)
Visit the official website of Finalmouse as well as forum for community members for updates to firmware.
Occasionally, they will release patches that address sleep issues and connectivity problems on models such as Ultralight 2. and Starlight-12.
Extra Tips to Keep Finalmouse Stable
- Beware of the USB hubs and plug them directly onto the motherboard.
- Keep Windows Updates current.
- Utilize the the original Finalmouse Cable or Receiver for the sole purpose of.
- If you are using wireless technology, make sure that the that the level of battery is higher than 50 percent.
- Delete any third party mouse programs that could disrupt Wake signals.
Finalmouse Models Affected by Sleep Issues
These issues are mostly reported across:
| Model | Issue Frequency | Type |
| Finalmouse Ultralight 2 | Moderate | Wired |
| Finalmouse Starlight-12 | High | Wireless |
| Finalmouse Centerpiece | Low | Display-integrated |
Wireless models like the Starlight series are more prone to disconnection due to USB receiver power-saving behaviors.
Why This Issue Happens More Often in Gaming PCs
Gaming PCs typically utilize powerful power management as well as extremely fast USB drivers that can be in conflict with sleep cycles.
Combine that with RGB controllers, fan hubs or USB DAWs And you’ve got several devices that are competing for priority wake.
What’s the result? The result? Finalmouse ceases to function during the night as it can’t restart quickly enough.
Alternative Workaround – Disable Sleep Entirely
If you want a quick fix:
- Go to Settings – System – Power & Battery – Screen and Sleep.
- Set Put my device to sleep – Never.
This doesn’t work well with laptops, however for a gaming system on desktops you can use this as a workaround until an update to the firmware is available.
Using Event Viewer to Diagnose Finalmouse Sleep Problems
If you’re more technical You can use Windows Event Viewer to see what takes place after your mouse is disconnected:
- Click Windows + R Type eventvwr.msc, press Enter.
- Go to Windows Logs – System.
- Filter for Event ID 43, 10400, or 6008.
- The above events indicate that the USB device did not resume.
It helps determine if the issue is an issue with a port or driver or hardware problem.
Can BIOS or Windows Updates Fix It Automatically?
Sometimes!
Microsoft’s cumulative updates and BIOS modifications to motherboards frequently enhance the wake-up process for USB devices.
Before you attempt any fixes manually Make sure you:
- Windows is completely up-to-date.
- Your motherboard’s BIOS is up-to-date.
- The chipsets and USB drivers can be installed via the official website of the manufacturer.
FAQs About “Finalmouse Stops Working After PC Sleep”
Q1: Why is my Finalmouse not work after my computer wakes up?
Because Windows shuts down USB ports to save power. If it wakes the computer, it may not always connect properly.
Q2 Does it need to disconnect and plug in my mouse on a regular basis?
No. Setting the right power settings, and deactivating USB selective suspend will usually fix the issue.
Q3: Could this be the result of a Finalmouse issue?
Not at all. This is mostly an issue with Windows USB management issue, not a hardware problem.
Q4 Is it present in both wired and wireless versions?
Yes however, the wireless ones (like Starlight series) are more susceptible to it. Starlight series) are more likely to experience it.
Q5: Can an update to the BIOS fix Sleep issues with the Finalmouse?
In the majority of cases, yesBIOS updates provide USB stability and performance improvements.
Final Thoughts
If your Finalmouse ceases to function following the time your PC shuts down It could be a source of frustration, especially when gaming, or other work.
With a few easy tweaks (such as disable USB power-saving, updating drivers or altering the BIOS settings the Finalmouse will remain responsive during long periods of sleep.
Be sure to stay up-to date with the most current Finalmouse software Keep Windows up to date so that you don’t have to deal with the same issue ever again.
